Valiuta:    
LT| RU| EN
Prekių krepšelis:
tuščias
 

Garso priedai


Tascam DR-10CS
Tascam DR-10CS

Tascam DR-10CS

228.00 €


Radote pigiau? Pasiūlykite savo kainą
Garantija: 24 mėn.
Gamintojas: Tascam

Nuoroda į gamintojo puslapį

Kiekis:


Dėti į krepšelį Teirautis







 

The DR-10C-series recorders connect to your lavaliere microphone to create a compact recording system that fits on a belt pack. The DR-10CS is designed for use with Sennheiser microphones. An option kit is available for Sony/Ramsa (AK-DR10CR).

The DR-10C recorders have both inputs and outputs, so they can either be used standalone or with a wireless transmitter. When used with a transmitter, the unit acts as a backup to protect against wireless dropouts during recording. For lectures or worship services, the DR-10C can record the entire program before it gets to the front of house system. And for events like weddings and reality TV production, the DR-10C is a compact recording system for body mics.

The lightweight DR-10C runs for hours on a single AAA battery. It records to standard microSD media. Recording features include auto-gain and a low-cut filter for simple setup. Its Dual Recording feature records a safety track of your audio at a lower level, so in case of distortion you have a non-clipped backup.

 

Specifications

General
Recording media   microSD card (64 MB – 2 GB)
microSDHC card (4–32 GB)
Recording and playback formats   Mono WAV files (BWF format), 48 kHz, 24 bit
Inputs and outputs
Analogue input (microphone)   DR-10CS (for Sennheiser): 3.5-mm mini TRS jack (with screw lock)
DR-10CH (for Shure): Mini XLR 4-pin male
  Maximum input level   –12 dBV
  Minimum input level   –53 dBV
  Mic input gain   10 dB to 35 dB (according to MODEL SELECT setting)
  Input impedance   33 kΩ or higher
Analogue output (passed to the transmitter)   DR-10CS (for Sennheiser): 3.5-mm mini TRS jack (with screw lock)
DR-10CH (for Shure): Mini XLR 4-pin male
Analogue output (Headphones jack)   3.5-mm mini stereo jack (dual mono audio output)
Audio performance, input to phones output
Frequency response   20 Hz – 22 kHz, +1/-3 dB
Distortion   0.05 % (1 kHz sine wave, maximum input level)
S/N ratio   88 dB or higher (PHONES level max., MIC GAIN set to LO)
Requirements for connected computers
Supported operating systems   Windows 7, Windows 8 (including 8.1)
OS X Mavericks (10.9)
OS X Mountain Lion (10.8)
Power supply and other specifications
Power supply   1 AAA battery (alkaline, NiMH or lithium)
USB bus power from a computer
Power consumption   0.45 W (maximum)
Current consumption (USB bus power)   0.25A (maximum)
Date and time data retention   Secondary lithium battery (built-in)
Dimensions (W × H × D)   52 x 56 x 25 mm (excluding protrusions)
Weight   63 g (with battery)
51 g (without battery)
Permissible operating temperature range   0-40 °C
Battery operation time
Conditions: WAV recording at 48 kHz/24 bit, continuous operation, JEITA recording times, in hours: minutes
Alkaline battery (Evolta)    
  10:00   Microphone and transmitter connected, headphones not connected, mic bias off, limiter off, dual recording off
  9:30   Only microphone connected, headphones not connected, mic bias on, limiter off, dual recording off
NiMH battery (Eneloop)    
  8:00   Microphone and transmitter connected, headphones not connected, mic bias off, limiter off, dual recording off
  7:30   Only microphone connected, headphones not connected, mic bias on, limiter off, dual recording off
Lithium battery (Energizer Ultimate Lithium)    
  15:30   Microphone and transmitter connected, headphones not connected, mic bias off, limiter off, dual recording off
  14:30   Only microphone connected, headphones not connected, mic bias on, limiter off, dual recording off


 
 
 
Produkcija

Naudinga informacija

Naujienlaiškis

Užsiprenumeruoktie mūsų naujienlaiškį ir sužinokite pirmieji apie naujausias akcijas, produktus, bei išpardavimus

Susisiekite su mumis

Vilniuje: 8 5 2394130
Kaune: 8 37 711296
Servisas: 8 5 2394118
vilnius@fotofoto.lt

Taip pat mus rasite