Valiuta:    
LT| RU| EN
Prekių krepšelis:
tuščias
 

Lazeriniai tolimačiai


Nikon Laser Forestry PRO
Nikon Laser Forestry PRO

Nikon Laser Forestry PRO

448.00 €


Radote pigiau? Pasiūlykite savo kainą
Garantija: 24 mėn.
Gamintojas: Nikon

Nuoroda į gamintojo puslapį

Kiekis:


Dėti į krepšelį Teirautis







Descriptions

  • Measurement range: 10-500 m/11-550 yd./33-999 ft.
  • In addition to actual distance, horizontal distance, height, angle and vertical separation (difference in height between two targets) measurement functions, three-point measurement (height between two points) is available
  • The results are displayed on both internal and external LCD panels. The external panel displays all results simultaneously.
  • Target Priority Switch System for measuring overlapping subjects:
    First Target Priority mode displays the distance of the closest subject — useful when measuring the distance to a subject in front of an overlapping background.
    Distant Target Priority mode displays that of the farthest subject — useful in wooded areas.
  • High-quality 6x monocular with multilayer coating produces bright, clear images
  • Long eye relief design affords eyeglass wearers easy viewing
  • Dioptre adjustment function
  • Single or continuous measurement (up to 20 seconds)
  • Waterproof (up to 1 meter for 10 minutes) but not for underwater usage; the battery chamber is water resistant
  • Wide temperature tolerance: -10°C to +50°C

Internal display

  • 1. Actual (linear) Distance
  • 2. Horizontal Distance
  • 3. Height
  • 4. Height between two points
  • 5. Three-point measurement
  • 6. Unit of measure (m/yd.)
    (No unit displayed for ft.)
  • 7. Target mark( )
  • 8. Laser irradiation ()
  • 9. Battery condition
  • 10. Distant Target Priority mode
  • 11. First Target Priority mode
  • 12. Angle
  • 13. Distance

External display

  • 1. Measurement unit (m/yd./ft.)
  • 2. Height
  • 3. Actual (linear) Distance
  • 4. Horizontal Distance
  • 5. Angle (º)

Measurement example (Three-point measurement: height between two points)

When three-point measurement is achieved, the height between points 2 and 3 is displayed on the internal LCD withHor Hgt+Hgt2 (solid), and Hgt(2) and Ang(2) are shown on the external LCD. Points 2 and 3 can be reversed.

Measurement example (two-point height measurement)

When the measurement is successful, you see the height from the base to the top displayed on the internal LCD withHgt + Hgt2 (solid).
For more information, refer to the external LCD.
"Base" and "Top" can be switched.



 
 
 
Produkcija

Naudinga informacija

Naujienlaiškis

Užsiprenumeruoktie mūsų naujienlaiškį ir sužinokite pirmieji apie naujausias akcijas, produktus, bei išpardavimus

Susisiekite su mumis

Vilniuje: 8 5 2394130
Kaune: 8 37 711296
Servisas: 8 5 2394118
vilnius@fotofoto.lt

Taip pat mus rasite